«

»

Feb 28

Cleaning urinals

This blog post covers best practice for cleaning urinals.

Warning!

Important: Always use appropriate personal protective equipment (PPE) when undertaking any cleaning task and follow the manufacturer’s product use and where relevant dilution guidance.
  • Flush the urinal to rinse down all interior surfaces.
  • Remove any urinal screens and blocks.
  • Remove any foreign materials.
  • Use an appropriate toilet cleaner and squirt a solid stream along the top of the inside flushing edge of the urinal. Allow the solution to run down the inside surface of the urinal.
  • Wipe down the exterior surface with a disinfectant cleaner and disposable rag or paper towel.
  • Scrub the interior surface of the urinal with a toilet brush, taking care to thoroughly scrub all surfaces.
  • Wipe all pipe work and flushing device (if present) with an antibacterial spray.
  • Place new urinal screen or block into the bottom of the urinal.

Notice

Disclaimer: Every precaution has been taken to ensure that the information and advice given in this Gopher user guide is accurate and reflects current best practice. If you are in any doubt on any matter in relation to the information or advice given then you should always take further professional advice. No responsibility for loss occasioned by any corporate body or individual acting or refraining from action as a result of using any material contained within any user guide shown on this site can be accepted by Gopher Supplies or its associated companies.